Posts

DDOS Attack

Image
DOS attack stands for Denial Of Service Attack.It means single attacker attacking single target. One computer and one Internet connection is used to flood the server with packets between valid and non valid request The attacker sends the large number of legitimate looking to the server in a way that the server cannot really distinguish between valid and non valid request. It will overwhelm the system to a point that the server cannot handle the capacity anymore. The point of DOS attack is overload the targeted servers bandwidth and other computer resources.This will make the server inaccessible to others. What is DDOS Attack? DDOS stands for Distributed Denial Of services Attack.It is most similar to DOS Attack, but the results are much difference. Instead of one computer and one Internet connection in normal DOS Attack. DDOS Attack utilize many computer and many connection the computer behind the such an attack are often contributed in the whole world and will be part ...

DNS Server

Image
DNS (Domain Name Server) is an Internet service which translates domain names into IP addresses. Each time you use a domain name, DNS translates the name into the corresponding IP address Each website has IP address to brows Internet.. we cant memorize all IP addresses.  So this service mainly done by DNS server. Early day DNS use central body protocol carryout this task, Now uses Distributed protocol. Transport layer DNS use UDP port 53. BIND(Berkeley Internet Name Domain) is a free open source DNS sserver. Configuration of BIND(DNS server) Installation in DNS server on Ubuntu sudo apt-get install bind9 To setting up DNS server on your mechine through vim editor vim /etc/bind/named.conf.options forwarders { 8.8.8.8; //edit those IP addresses 8.8.4.4; 192.168.2.240; 192.168.2.241; }; After change the file hit Esc and :qw! to save the file Then open the file vim /etc/resolv.conf Change as ab...

DHCP (Dynamic Host Configuration Protocol)

Image
DHCP stands for Dynamic Host Configuration Protocol. It used to provide network configuration information's to clients automatically.For an example, if a device comes into the network, a server send the all the network parameter to he device, rather than configure IP address,subnet mask and DNS IP manually or statically through network administrator,this is what call as DHCP. It uses UDP(User Datagram Protocol) DHCP server used port number 67 and DHCP client used port number 68.It reduces the load for Network Administrator and easy to assign IP addresses for large networks. DHCP uses DORA process : D - D iscover O - O ffer R - R equest A - A cknowledgement                                                     ...

Draw a highcharts using php array

Image
Here I would like to share my knowledge about the printing highchart in off-line in your specific server and draw the highchart according to the data which is inside the array. My raw array is "result":[["2018-01-25","NOVEL",103406],["2018-01-25","CRIMINAL",10371846],["2018-01-24","CRIMINAL",3145733],["2018-01-23","CRIMINAL",9437187],["2018-01-22","NOVEL",7768],["2018-01-22","CRIMINAL",12731204],["2018-01-21","NOVEL",9004],["2018-01-21","CRIMINAL",8106865],["2018-01-20","NOVEL",15488],["2018-01-20","CRIMINAL",5011413],["2018-01-19","CRIMINAL",6291461],["2018-01-18","NOVEL",16764],["2018-01-18","CRIMINAL",15535024],["2018-01-17","CRIMINAL",9437189],["2018-01-16","CRIMINAL",12582...

Ubuntu 17.04

Image
I'm a Ubuntu user. Here I would like to share some of my experience when I started to upgrade Ubuntu 16.04 to Ubuntu 17.04. Suddenly laptop power loss when it installing   I forget to check my battery percentage so it was shutdown. I plugged laptop power and here I am going to tell you what are the steps I did to resolve this issue. press ctrl+Alt and T  (It will show the Terminal of root type your user name and password. sudo apt-get update  sudo apt-get upgrade sudo dpkg --configure -a Then it will install as normally. Failed to connect WiFi and USB donggle I tried many solution but It won't worked. Here I'm going to tell you which code I used to resolve this issue. sudo systemd-resolve www.google.com  check whether you have got this kind of output If you don't get this you have to check whether wifi.scan-rand-mac-address is on or not. so you have to type sudo nano /etc/NetworkManager/NetworkManager.conf   then make it...

Introduction to PuTTy

Image
PuTTY PuTTY is a free open source terminal emulator, serial console and network transfer application. It supports several networks protocols such as: SCP SSH Telnet rlogin and row socket connection Download PuTTY and install into Ubuntu We have to download it from PuTTY official website which is www.putty.org Extract it by using this command : tar xvzf putty-0.70.tar.gz  change the folder cd putty-0.70  install sudo make install How to use PuTTY Press window button on your keyboard. Search putty then you will see the image of putty software open it and fill your Host name and Port number and select your connection type and press open You will see this terminal window. Here you have to type user name and password. Then you can access the server via this.